Skip to main content

SP POWERWORLD ADVR-16

Analog Digital 16 Amp Voltage Regulator for Parallel Operation

The ADVR-16 Universal Digital Voltage Regulator can be used in a Genset parallel operation and is Compatible with Marelli M40FA640A - M40FA640A/A - M16FA650A - M16FA655A - M25FA645A - M25FA600A - M16FA600A - M25SA600A - Basler BECS200 - KR4FFX - KR4 - KR7 - AEC63-7 - Caterpillar 3516B - VR65 - VR6 - 85Z 11892 - 3406 - VR3

Ex stock - shipped Worldwide. For GBP, EURO or USD pricing please contact us:

Sales: [email protected]

Office: [email protected]

Tel: +44 (0)115 923 2568 (United Kingdom)

Tel: (24-hour) +44 (0)7484709956 (United Kingdom)

Manual

Features

  • Voltage Regulation < ±0.5%
  • Suitable for brushless type generator sensing input 170~510VAC
  • Can be used in parallel operation
  • 16 ADC current output
  • Suitable frequency 50/60Hz
  • Inverse-time over excitation protection
  • O/E over excitation protection
  • Under frequency protection & soft start voltage ramping
  • Load CT current compensation, analogue voltage input

Specifications

* Sensing Input - Voltage 170~510VAC single phase 2 wire, DIP switch selectable Frequency 50/60Hz * Power Input - Voltage 60~300VAC single phase 2 wire * Output - Voltage Max. 90VDC @ 240VAC input Current Continuous 16A, Intermittent 20A for 10 seconds - Resistance Min. 5 Ohm * Volts Regulation - ±0.5% (with 4% engine governing) * Voltage Build-up - Residual volts at AVR terminal > 5 VAC * Over Excitation Protection - Max. DCV 95% 20 seconds * External Volts Adjustment - ±5% with 2 K Ohm 1 watt trimmer * Unit Power Dissipation - Max. 10 watt * Thermal Drift - 0.03% per °C change in AVR ambient * Under Frequency Protection - 55Hz @ 60Hz , 45Hz @ 50Hz (Adjustable) * CT Current Compensation Input - 1A or 5A (Adjustable) * Analogue Input - Max. ±5VDC ±10% @ ±3VDC * Environment - Operating Temperature : -40~70 °C - Storage Temperature : -40~85 °C - Relative Humidity : Maximum 95% - Vibration : 3.3G @ 100~2KHz * AVR Controls Function - VOLT : Voltage Adjustment - STAB : Stability Adjustment - U/F: To Set the U/F Knee Point (*U/F: Under Frequency Protection) - DROOP : Droop Adjustment - TRIM : Analogue Input Adjustment Dimensions - 156.0 (L) x 106.0 (W) x 43.0 (H) mm Weight - 535g ±2%

Dimensions